How to disassemble the worn hexagonal nut?
Whether in daily life or work, you must have seen hexagonal nuts everywhere. Hexagonal nuts are mainly used together with screws to tighten fasteners of equipment. Especially in mechanical equipment, there are many places where hexagonal nuts are used to fix parts.
However, due to frequent disassembly, the inner hexagon of the bolt is prone to rounding, making it difficult to remove it with an inner hexagon wrench. In many cases, it is difficult to disassemble nuts through damage. This method is very cumbersome. Needless to say, the loss of nuts and screws is also significant. How to disassemble worn hexagonal nuts? Titanium standard parts manufacturer tells you!
For connections where the head of the hex nut is slightly higher or flush with the fixing plane, a hex nut slightly smaller than the outer diameter of the hex nut head can be used after cooling. Tighten the nut with a movable handle and remove the hex bolt.
Hexagonal nuts have many functions, especially inner hexagonal nuts, which are usually the most commonly used fasteners for assembling plastic parts. It can be used not only for continuous assembly, but also for fixing frequently repaired and replaced parts. Improper selection of hexagonal nuts often leads to assembly, use, and quality issues. Pre design the threads in the mold.
As a widely used fastener, nuts, although small, play a significant role. Many of them are fixed and difficult to disassemble. Untreated nuts are prone to oxidation and rust, resulting in excessive wear and tear during equipment operation. Therefore, regular inspections should be conducted during use.
